Thread: Running Banebots Transmission in Direct Drive
View Single Post
  #7   Spotlight this post!  
Unread 27-01-2007, 22:20
Jared Russell's Avatar
Jared Russell Jared Russell is offline
Taking a year (mostly) off
FRC #0254 (The Cheesy Poofs), FRC #0341 (Miss Daisy)
Team Role: Engineer
  
Join Date: Nov 2002
Rookie Year: 2001
Location: San Francisco, CA
Posts: 3,077
Jared Russell has a reputation beyond reputeJared Russell has a reputation beyond reputeJared Russell has a reputation beyond reputeJared Russell has a reputation beyond reputeJared Russell has a reputation beyond reputeJared Russell has a reputation beyond reputeJared Russell has a reputation beyond reputeJared Russell has a reputation beyond reputeJared Russell has a reputation beyond reputeJared Russell has a reputation beyond reputeJared Russell has a reputation beyond repute
Re: Running Banebots Transmission in Direct Drive
CIM free RPM = 5500-5750 (depending on which individual motor you test)

Reduction = 12:1

Output Shaft RPM = 5500-5750/12 = 458-479

Speed with a 6" wheel = 458-479 RPM / (60 sec/min) * (2*pi*3") / (12 in/ft) = 12-12.5fps

Speed with a 8" wheel = 458-479 RPM / (60 sec/min) * (2*pi*4") / (12 in/ft) = 16-17fps

Keep in mind that those are numbers assuming FREE SPINNING RPM. In reality, we find the loss to be about 25%, so with a 6" wheel you can expect a speed of about 9-10 fps and the speed with an 8" wheel to be about 12-13 fps.