|
Re: small banebot motor with 64:1 gearbox
We are using two 64:1 42mm Gearbox w/ the FP motor to power our forklift. Two 64:1 36mm Gearboxes will be powering the "arm".
We'll tell you how well it goes later this week. We realized the best way to see if it'll work is to try it, then go from there. If there isn't enough torque, then we'll get different gearboxes.....
__________________
Team 321: CHS RoboLancers - Drexel University, CHS Alumni Assn., SDP, Philadelphia Motorsports, Lima Corperation
|