Thread: Banebot 56mm gearbox - double D related
View Single Post
  #4   Spotlight this post!  
Unread 29-01-2007, 14:40
Nitroxextreme's Avatar
Nitroxextreme Nitroxextreme is offline
Relation to Mrs. Steve
AKA: Jon
FRC #1626 (Falcon Robotics ; 190 (Gompei and The Herd))
Team Role: Mentor
  
Join Date: Jan 2005
Rookie Year: 2005
Location: Bedminster, NJ
Posts: 276
Nitroxextreme is a splendid one to beholdNitroxextreme is a splendid one to beholdNitroxextreme is a splendid one to beholdNitroxextreme is a splendid one to beholdNitroxextreme is a splendid one to beholdNitroxextreme is a splendid one to behold
Send a message via AIM to Nitroxextreme
Re: Banebot 56mm gearbox - double D related
I have been following the banebot transmission failure threads for some time now and now I feel teams need to take action.

We are currently running 2 CIMs on each gearbox...so we definately need to get parts made. At the moment are transmissions are on the robot and not easily accessable, but we will get to them to replace the Double D plate. We have yet to have an issue...but are going to take precautions now.

Does anyone have a CAD drawing of the piece that needs to be made?

It is my hope that teams which have the resources...get many of these plates made to help out other teams who are not as lucky.

I would love to not have to worry about it and wait for BaneBots, but their response time (at least with me) was not acceptable. Teams need to start production now so the plates can be replaced BEFORE regionals.
__________________



"He needed a chuck norris lesson in FIRST"...."I will give him a round house kick to the face...with gracious professionalism"