[Mike Betts]

Originally Posted by Mike Norton

Thanks for the information.

The pressure will never get high due to the fact it is a open system. we will never get to the 60 psi. we are using the compessor for only blowing the air never to store it. once the compessor is shut off there is 0 pessure in the lines.

Mike,

You will find that the venturi works best at about 29 PSI inlet pressure. It must be connected to the low side of the pressure regulator and there must be a pressure switch on the high side.

If you don't want to take my word on this, I would suggest that you post on the official FIRST Q&A to get a ruling on this.

Mike