Thread: do we "NEED" the power distribution block
View Single Post
  #9   Spotlight this post!  
Unread 06-02-2007, 09:28
BrianBSL BrianBSL is offline
Registered User
FRC #0190
  
Join Date: Sep 2004
Rookie Year: 2000
Location: Worcester, MA
Posts: 251
BrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud of
Re: do we "NEED" the power distribution block
Quote:
Originally Posted by Al Skierkiewicz View Post
Brian,
I agree that the instructions from Rockwell say it can be cut. But the normal use of this system is inside an enclosure where there will be no contact with other parts, electrical and mechanical. Our use has not been fully considered for insulating the cut ends and I am hoping that the GDC addresses this in the future.
The instructions don't seem to be generic, however, as the drawing has FIRST in the part number, and the written instructions specifically reference that drawing.
__________________
My posts represent my personal views only, and do not represent the views of either my team, Team 190, nor its primary sponsor, Worcester Polytechnic Institute.