|
Re: Pneumatics (Spike Relay, Solenoid etc.) Programming
Quote:
Originally Posted by Loki1989
I am having trouble programming for pneumatics i dont know where to begin and some advice will help thanks  |
If you're using the double solenoid one red wire will go to the M+ and the other red will go to M-. Both Ground wires can go to the fuse breaker panel. You do not need two spikes for a double solenoid.
For the code you need values of 1 or -1 on the relay outputs(or pwm if you want) to turn on the solenoid on their respective sides.
The double solenoid will remain in it's last position when both outputs of the spike are off.
__________________
Kevin Li
596 - Sciclones
1405 - Finney Falcons
2262 - Holliston Panthers
Last edited by kevin.li.rit : 08-02-2007 at 22:29.
|