Quote:
Originally Posted by Dad1279
I wouldn't leave any holes in the bottom. You don't want a stray forklift spearing the bottom of your bot.
4x4, then a sheet of ply, then rails on top so the bot doesn't ship on it's wheels.
|
Since a 4x4 is really 3.25 inches I would make sure you have 3.25 inches of clearance at all points under the base of your crate except where the 4x4 touches floor. If you want to add a 2x4 to support robot under floor of crate and would also add a 2x4 to the 4x4. Take it from some one has driven a forklift for about 30 years. You want as much clearance under crate as possible.