|
Re: losing air pressure
take out each fitting, clean the threads (carefully) and wrap with one layer of teflon tape - make sure you don't cover the end - then re-install each fitting. use a wrench and make sure they are tight.
Also, be sure your tube ends are cut straight and pushed all of the way in.
With a tight system, you should be able to go for 30 minutes or more and only lose 5 -- 10 psi.
__________________
Chris Fultz
Cyber Blue - Team 234
2016 IRI Planning Committee
2016 IndyRAGE Planning Committee
2010 - Woodie Flowers Award - Championship
|