Thread: Banebots 42mm gearbox: Recommendations for use
View Single Post
  #31   Spotlight this post!  
Unread 16-02-2007, 00:22
gburlison gburlison is offline
Mentor
FRC #0662 (Rocky Mountain Robotics)
Team Role: Mentor
  
Join Date: Sep 2002
Rookie Year: 2000
Location: Colorado Springs, CO
Posts: 245
gburlison is a name known to allgburlison is a name known to allgburlison is a name known to allgburlison is a name known to allgburlison is a name known to allgburlison is a name known to all
Re: Banebots 42mm gearbox: Recommendations for use
Quote:
Originally Posted by ZZII 527 View Post
Here are the dimensions I worked from:

Thickness: 4mm (5/32" stock works perfectly)
Outside Radius: 25mm
Double-D Radius: 10mm
Double-D Flats: 8mm
Pin Pattern Radius: 9mm
Pin Hole Diameter: press fit for 3mm (#32 drill, 0.116" works well)
I am not sure that some of your dimensions make sense, I think you meant:
Outside Diameter: 25mm

I measured the Double-D Diameter to be .493" or 12.49mm
__________________
Gordon Burlison - Mentor
662/Rocky Mountain Robotics
"Every silver lining's got a Touch of grey - Robert Hunter"
"No sense in being pessimistic, it wouldn't work anyway"