|
Re: Which buttons does what?
if you're referring to the joystick, then you can map the buttons to whatevr you want thm to do...within reason of course.
As for the Robot Controller, the button labeled "PROG" will allow you to upload code to the RC, and the button labeled "RESET" will, well, reset the robot status...you should press and hold it for about a second after uploading code....
check the reference guide at ifirobotics.com for a better overview.
__________________
/*********************
2005: Software Assistant
2006: Software Head
2007: President/Driver/Software Head/Temporary Safety Captain
*********************/
//2005: Chesapeake Regional - Finalist
Life is what you do outside of FIRST. No wonder it's so short.
|