|
Re: No camera data...
There's a number things to check:
1) The backup battery is fully chared at 7.2 volts.
2) The TTL and power cables are attached to the camera and to the RC.
3) You have the servos in the corrent pwm connectors. (Their defined in tracking.h)
Right now our team is trying to fine tune the camera with our PID method before the robot ships tomorrow. :X
__________________
Amperage Robotics Team 1225
Site under-going revamp. :/
Last edited by pheadxdll : 17-02-2007 at 18:57.
|