View Single Post
  #8   Spotlight this post!  
Unread 22-02-2007, 14:56
Springman Springman is offline
Registered User
FRC #0085 (BOB)
Team Role: Engineer
 
Join Date: Jan 2006
Rookie Year: 2003
Location: Zeeland, Mi
Posts: 14
Springman is an unknown quantity at this point
Re: Problems turning

If you are using the stock banebots gear boxes, the first thing that I would do is replace the existing planetary gear set in the stock unit to the 4:1 gear in the change kit (available from banebots.) This will give you a 16:1 ratio vs. the stock 12:1 ratio. This will not negatively impact your weight issue, and depending on how accessible your gear boxes are, this swap can be made in 10-15 minutes easily. In addition, if you have reduction between your gearbox shaft and the sprocket at the tires, you can change the sprocket sizes to further increase your reduction. You will be giving up some speed everytime you make a change. If you do decide to buy omni wheels, you may want to buy extras. Several teams have had issues breaking the omnis in a 4WD configuration. The kitty-corner wheel configuration may help the breakage issue. The simplest test to perform on a drivetrain is to, on carpet, push against a wall. You should be able to spin the tires without tripping the breakers. Some simple things to check are:

1. Are you using the right fuses (40Amp.)
2. If so, are the fuses tripping when you are turning? If so, you will have to make a mechanical change.