[Kevin Sevcik]

So for those not at GLR, our BB 1:256 transmissions experienced the typical double-D failure. However, we managed to get the shaft welded to the carrier for GLR and ran okay. For LSR, we've hardened some carriers from a pair of 1:16 trannies. (1450*F soak, quench in hot brine, 900*F temper, I'll try to get a hardness test soon)

At any rate, part of the solution is also machining the ring gear slightly shorter. Since we'll have all the guts out of the trannies any ways, I'm planning on cleaning them up and regreasing them, but I have no clue what kind of grease BB has in there. It's some sort of very light, highly petroleum smelling grease. Does anyone have a good idea on what it is or what I should/could use? 33 gave us some for greasing up the welded carrier, but it looked like it was having deleterious effects on the welded carrier for some reason....