Quote:
Originally Posted by thefro526
One of the reasons that I do not personally like about 6 wheel drives with a lowered center wheel is that I am afraid of the rocking back and forth. I assume that if you make the amout that the wheels are lowered minimal (1/8") then it would rock very little. I was just hoping to achieve the ability to spin in a dime.
|
It depends on your design. The chassis that I designed didn't rock back and forth at all. The center wheels were lowered 1/8th of an inch and the wheels were modified andymark kit wheel. I used
roughtop for my design. Roughtop has a coefficient of friction of 1.3 (I know many of you know this, but there are others who doesn't).
Also, I saw a similar 6wd when I went over to team 1251's home. They are using 4 inch wheels and middle wheels were dropped .25". I didn't see any rocking on their bot, and even if there was any it was very minimal. They used
wedgetop. The coefficient of friction for wedgetop is 1.2. The designer of the robot made a statement as follows, "We lowered the middle wheels .25" but the wedgetop compresses about 1/8" so in reality, it is only 1/8" lowered."
I have got a calculus exam Monday morning that I need to study for. I know there are few posts here that asks how to design a 6wd, or how it works (similar to those questions). If you got questions and would like to have a discussion, you have got my aim screen name or email in my profile. Feel free message me.