|
Re: pic: 968 has ramps? Since when????
Quote:
Originally Posted by thatoneguy
To anwser:
1. we have a servo on the top which holds on to two cables. we release the servo and the ramps fall via gravity.
2. at the end of the ramp there is a leaver when switched will release the gas shocks.
3. around 17 degrees
4. the ramps start at an incline. they have to drive up and hit the leaver to activate the ramps.
|
So the robot driving up activates the ramps. And if so can we see a picture of that?
__________________
Team 2522 | Mentor
Formerly of Team 22 and Team 4
|