Quote:
Originally Posted by Steve W
Everyone knew about this issue a while ago. A little Loctite will fix the problem.
|
Loctite on the yellow jumper's screws might be okay, but
don't use Loctite it on screws holding wires in place. The wires
will loosen with time (and vibration), and you
will want to tighten the screws regularly.
I don't mind the Rockwell block. If properly installed, it serves its purpose well. The only big problems I've seen teams have with it are due to misunderstanding how the wires get clamped in.
After using the DIN rail this year, I've been playing with the possibility of adapting the Spikes and Victors to be DIN-mountable as well.