|
Re: Banebot Transmissions in Atlanta
97 has a small number of carrier plates (about 4x56mm and 10x42mm) that could be used as replacements for double-D failures. (No whole transmissions, sorry.) They were cut on a waterjet so the pin holes need to be finish-drilled / the double-D filed, but in a pinch they may come in handy. Just stop by our pit.
__________________
MIT Mechanical Engineering
>> College Mentor, Team 97: Cambridge Rindge and Latin School with The Edgerton Center, MIT Mechanical Engineering, Bluefin Robotics, and Draper Laboratory
>> Alumnus, Team 527: Plainedge HS
|