Quote:
Originally Posted by team1203 4life
nice drive syestem man how did you put that together my team wants to do a tank drive if you have any hints please do tell
|
Here is the breakdown of our track modules.
On the front side, the sprocket was mounted to two CIMs via a banebot gearbox. On the back, the green radius was fitted into large slots & spring loaded for track tension. The 2 small square holes were fitted to our 80/20 frame, which slid all the way through to the orange plate & was held with one bolt each. Extremely robust but slightly on the heavy side at around 11 lbs each (if I remember correctly).
