|
Re: pic: A "Bit" of a problem.
Depending on the size of the bit, the pressure on the drill bit, and the quality of the drill bit, it is very easy to bend/break them.
Normally they just break right off...
__________________
Timothy Delles - Clarkson University
2011 - Present: FRC Team 78 - AIR Strike
2011 - Present: VEX Team 78 - AIR Strike
2010 - 2011: FRC Team 3280 - Rhode Rebels
2001 - 2009: FRC Team 229 - Division By Zero
|