Quote:
Originally Posted by BlackShadowFox
True i forgot all about those things.
hmmmmmmm how to make sure it would be light enough but also strong enough while keeping these features? 
Are you sure about the air system? |
Yup. See
<R101> The compressor may be mounted on the ROBOT, or it may be left off the ROBOT and used
to pre-charge compressed air in the storage tanks prior to bringing the ROBOT onto the
playing field. Off-board compressors must be controlled and powered by the ROBOT. The
only difference between an on- and off-board compressor is that the off-board compressor is
physically removed from the ROBOT. Note: the intent of this rule is to permit teams to take
advantage of the weight savings associated with keeping the compressor off-board. But
using the compressor off-board of the ROBOT does NOT permit non-compliance with any
other applicable rules.