View Single Post
  #18   Spotlight this post!  
Unread 13-11-2007, 21:22
teh_pwnerer795 teh_pwnerer795 is offline
Registered User
AKA: !!Mitch!!
FRC #1392
Team Role: Programmer
 
Join Date: Nov 2006
Rookie Year: 2006
Location: Ajax, Canada
Posts: 142
teh_pwnerer795 is just really niceteh_pwnerer795 is just really niceteh_pwnerer795 is just really niceteh_pwnerer795 is just really nice
Send a message via MSN to teh_pwnerer795 Send a message via Yahoo to teh_pwnerer795
Re: Silicon Controlled Rectifier

Cool. So i've made a small list of what i have to change.

1. reverse diodes
2. move capacitor
3. remove the bleeder diode and diode just after the anode of the coil.

We are using these pneumatics sensors that detect a metal object. I will be placing these over the aluminum to detect the projectile passing through. The program will then sorta calculate when to shot it off or if the projectile even moved. -.-'

The digital outputs and transistor idea sounds really good and i'll be looking into it. As well with the ProcessLocalIO() loop and interrupts



The only part that i have a model # for is the SCR.. The model # is (M25/16-1k). This part can be found on the following website. *at the very bottom. http://www.surplussales.com/Semicond.../Diodes-1.html
__________________
Great Art is Created; Master Pieces are Stolen

[n00b]Teh_Foxdonut teh_pwnerer795 - CounterStrike:Source

Last edited by teh_pwnerer795 : 13-11-2007 at 21:31.