|
Re: Can't enter Vex autonomous mode when using MPLab
Jamie,
This is from mplab_2006_fvc_programming_guide.pdf (note that this document is unchanged from last year):
Quote:
When competing use :
‘Vex_alltimers_wauton_jmpr.lib’
or
‘Vex_library_wauton_jmpr.lib’.
These libraries use interrupt pin 6 to determine whether or not you want to run competition
code. The autonomous duration is set for 20 seconds. The operator match
duration is set for 2 minutes and 30 seconds.
|
Emphasis mine.
You need to have interrupt jumper 6 installed to have an autonomous mode.
If asked, the Technical Director for your tournament should have known this.
Mike
__________________
Mike Betts
Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013
As easy as 355/113...
|