|
Re: Autonomous For TECH Robots
Quote:
Originally Posted by Kingofl337
Make sure no devices are in interrupts 5 & 6...
|
Adam,
That advise is accurate only if you are using EasyC... If using MPLAB, jumper 6 must be installed.
I was able to help John via a phone call. He was not using the very latest master code for his robot.
The very latest code for all three platforms (EasyC, RobotC and MPLAB) can be found here. FTC teams should be sure that they have the latest code installed before competing.
Regards,
Mike
__________________
Mike Betts
Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013
As easy as 355/113...
|