Thread: Issues with non working victor constant orange led
View Single Post
  #9   Spotlight this post!  
Unread 10-12-2007, 18:17
popo308's Avatar
popo308 popo308 is offline
Registered User
AKA: Brent
FRC #1625 (Winnovation)
Team Role: Alumni
  
Join Date: Jan 2007
Rookie Year: 2006
Location: Winnebago, IL
Posts: 312
popo308 is a name known to allpopo308 is a name known to allpopo308 is a name known to allpopo308 is a name known to allpopo308 is a name known to allpopo308 is a name known to all
Send a message via AIM to popo308
Re: Issues with non working victor constant orange led
OK if your victor has a solid orange LED light and you are telling the motor plugged into that particular victor to run and it is not running you can try a few things. (just so you know if there is a solid orange LED then THE PWM CABLE IS FINE!!!)

It is receiving proper signal and it is communicating with the RC.

A few things you can check


1. Is the victor plugged in to the correct PWM signal OUTPUT spot on the RC?
2. Is the polarity correct? (+ is in + and - is in -)
3. Is the power IN from the battery plugged into the IN POWER on the victor not the out power?


Try a few of these things and let me know if that works for you.