|
Re: Problems with IR Board
Quote:
Originally Posted by richardmcc2
Hmm....I don't quite understand how you are powering your IR board. Is the power coming from one of the IO ports on the Vex controller? The power output is only 5V, so does the IR board still work when the minimum required input voltage is 7V?
|
Vex controllers are quite similar to the FRC RC. The Vcc voltage out on the Analog in and Digital in/out connectors is +5vdc. The Vcc voltage on the PWM connectors is the same voltage as the backup battery on the RC and the main battery on Vex, both being +7.2vdc.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|