Quote:
Originally Posted by Tottanka
A question about the IR thingy.
Is it possible to have one of the 4 cahnnels swith different modes, for example, switch between arm control and drive control, and those making the other 3 buttons do a different thing in each of those modes?
|
there's alot more information on the IR remote in section 8.3.8
Quote:
|
Originally Posted by 2008 Manual
<R69> Reaction of the ROBOT to communications received from the SIGNALING DEVICE must
meet all of the following criteria:
• For a single MATCH, the ROBOT shall be limited to react to a maximum of four distinct
commands - either through hardware or software limitations, or a combination of the two.
• The ROBOT shall not dynamically change the recognized command set during a MATCH....
|
according to that you cannot have the robot do different things when you press any series of buttons. however, i'm not sure if this includes having a button toggle between 2 simple functions, like toggling an arm between moving up and down?