Quote:
Originally Posted by TomZ
But technically you are only sending out four commands, in different orders to different things
For example if you press #1 while the arm is down, and it goes up, and then you hit it again, and it goes down, wouldn't that be considered two commands?
|
in addition to rules <R65>, <R69>, and <G01>, rule <G49> clearly states that you
must have only 4 distinct actions that the robocoach can signal
Quote:
|
<G49> ROBOCOACH Signaling – If the ROBOCOACH will be providing signals to the ROBOT, then prior to the start of each MATCH the ROBOCOACH must place a Signaling Card in the ROBOCOACH STATION. The Signaling Card shall be a 3-inch by 5-inch card listing the one to four actions that can be commanded by the ROBOCOACH.
|
see also my post here
http://www.chiefdelphi.com/forums/sh...4&postcount=25