Thread: New Controller Chip Info Available
View Single Post
  #3   Spotlight this post!  
Unread 23-06-2002, 22:00
archiver archiver is offline
Forum Archival System
#0047 (ChiefDelphi)
  
Join Date: May 2001
Location: Pontiac, MI
Posts: 21,214
archiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond repute
My Mistake
Posted by Nate Smith.   [PICTURE: SAME | NEW | HELP]


Student on team #74, Holland FIRST Robotics, from Holland High School and Haworth, Inc..

Posted on 9/15/99 7:17 AM MST


In Reply to: Re: New Controller Chip Info Available posted by Mike on 9/15/99 4:31 AM MST:



: I'm not sure you are looking at the correct microcontroller. FIRST says it's the 'Basic Stamp II-SX'. There is a controller on the Parallax site with that exact name. I looked at the specifications for the SX Tech controller and it is over FIRSTs head right now. However, I beleive the BS2-SX is a smart choice.... it's basicly a powered up BS2. Here's the specs:
: Processor: 50 mhz
: Instructions: 10,000 per second
: Program RAM: 16k bytes
: RAM: 95 bytes (RAM: 32, Scratch Pad RAM: 63)

: - Mike
: PS: The link below will get you to the BS2-SX

Yeah, that was an 'oops' on my part...I saw SX and figured they would only have one chip or set of chips with that name. Either way, we still have some information on the new controller...

Nate


__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.