Thread: what Chain size and tensioner to use for the drivetrain
View Single Post
  #8   Spotlight this post!  
Unread 09-01-2008, 23:15
burkey_turkey burkey_turkey is offline
Registered User
AKA: Andrew
FRC #0422 (MechTechs)
Team Role: Mechanical
  
Join Date: Apr 2006
Rookie Year: 2004
Location: Richmond, VA
Posts: 161
burkey_turkey is a splendid one to beholdburkey_turkey is a splendid one to beholdburkey_turkey is a splendid one to beholdburkey_turkey is a splendid one to beholdburkey_turkey is a splendid one to beholdburkey_turkey is a splendid one to behold
Re: what Chain size and tensioner to use for the drivetrain
Quote:
Originally Posted by artdutra04 View Post
25-pitch chain will work fine for drive-train applications if you can manage the manufacturing tolerance required, and save you a fair amount of weight over 35-pitch. Team 190 has always used 25-pitch roller chain, and Team 228 will be going with 25-pitch this year.

As for tensioning roller chain, Team 228 always uses an extremely simple method of using HDPE bar stock with an off-center hole. As you rotate the HDPE around the center hole, the diameter changes and works perfectly for adding tension to roller chain. Here's a photo of three applications of these simple chain tensioners from our 2007 robot:
I def agree. We started using HDPE two years ago and have never looked back. Its easy light simple and effective.