|
Re: Integration of Gyro with Easy-C Pro
Here is a sample of how to use the Gyro.
Also if you check out the tutorials in "Getting Started" in the help file
there is a drive strait using the gyro example.
Also easyC runs at full speed all the time even in operator control. Though the two PICs sync every 26ms because of the
master code. If there is no change or no new data from the master the same value will be loaded. For more detail you may
have to get a hold of for Brad.
__________________
FIRST Team 501 PowerKnights - Mentor
FIRST Team 40 Checkmate - Mentor Alum
FIRST Team 146 Blue Lightning - Alumni
Last edited by Kingofl337 : 11-01-2008 at 15:08.
|