|
Re: MPLAB workspace (HELP!)
Once you have created the new project using "New" you need to choose the ToolSuite to use.
Menu "Project:Select Language Toolsuite...", brings up a dialog.
Menu "Active Toolsuite:" choose "Microchip C18 Toolsuite".
All the C files should now be in the "Source Files" list.
You may also need to set the locations of the various tools if you have a non-standard setup (might be easier to reinstall a standard setup if you don't know what you are doing).
__________________
Andrew Nicholson
2011 FRC Robot Inspector (Seattle, Portland)
Mentor FRC 1778 "Chill Out", FTC 3018, 3940 "Hawks", 4434 "Heat Misers"
"Everything should be made as simple as possible, but no simpler."
|