Thread: Using the IR remote to send radio commands to the robot
View Single Post
  #2   Spotlight this post!  
Unread 13-01-2008, 21:05
Branden Ghena's Avatar
Branden Ghena Branden Ghena is offline
Previously: tawnos23
FRC #0240 (TEMPEST)
Team Role: College Student
  
Join Date: Nov 2005
Rookie Year: 2004
Location: Houghton, Michigan (MTU)
Posts: 303
Branden Ghena has a spectacular aura aboutBranden Ghena has a spectacular aura aboutBranden Ghena has a spectacular aura about
Re: Using the IR remote to send radio commands to the robot
I believe all signals between the operator interface and the robot are cut off during autonomous (hybrid) mode, and if so this would not work.

Also, the fact that the IR board needs at least a 7 volt supply might also be a problem, because I don't believe you can get that much from your Operator Interface.

Good out of the box idea though.
__________________
Branden Ghena - Michigan Tech Student and Team 240 Alumnus
Working Towards: Electrical Engineering and Computer Engineering Double Major

"All we have to decide is what to do with the time that is given to us." - Gandalf