16-01-2008, 12:57
|
 |
Registered User
AKA: artqny
 FRC #2022 (Team IDK) |
|
Join Date: Jan 2007
Rookie Year: 2007
Location: Illinois
Posts: 48
|
|
|
Re: 2007 CIM's in 2008?
Quote:
<R58> Motors, pumps, and, Robot Controllers from previous robots shall not be used in addition to those provided in the 2008 Kit Of Parts. They may be used as direct one-to-one SPARE PARTS for those provided if the provided part fails or is damaged. They can only be used if they are identical to the part being replaced.
...
<R59> Additional motors specifically permitted on 2008 FRC ROBOTS include:
• All motors, actuators, and servos provided in the 2008 Kit Of Parts,
• HITEC HS-322HD servos,
• FIRST Tech Challenge (FTC) servos (Innovation First part number 276-2162),
• FIRST Tech Challenge (FTC) motors (Innovation First part number 276-2163),
• One or two additional 2-1/2” CIM motors (part #FR801-001 and/or M4-R0062-12 in addition to those provided in the Kit Of Parts. This means that up to four, and no more, 2-1/2” CIM motors can be used on the ROBOT.
|
I think these are the rules associated with your question.
Last edited by Kat Kononov : 16-01-2008 at 13:10.
|