Quote:
Originally Posted by dlavery
A request has been submitted to FIRST to have the rule amended to permit these types of modifications (which are effectively safety improvements). However, until that request is approved and a change to the rule is actually put in place, you are running a risk by modifying the battery charger.
-dave
.
|
Dave,
Thanks for pointing out Rule <R67> and to whoever submitted the rule amendment request to FIRST. We missed that one.
Often times you will see banks of chargers in the pits charging batteries. The chargers are usually accumulated from prior years and meet the requirement in <R48>. Last year there was a very much improved safety across the board in Atlanta on this issue. I distinctly remember our team moving into the GWCC and before we could even get into our pit safety inspectors told us that there was widespread compliance.
Without getting into a lot of legalisms I suppose one could leave the 2008 charger at home and use another charger without violating <R48> or <R67>.
We will enthusiastically support the decision FIRST announces.
Until then you can our device and wire it into an interstage adapter. Basically take our gizmo and connect it to two posts inside of a box. Then take the charger clips and connect it to the posts (sort of like battery posts). And secure well.
Thanks to all