|
Re: Official Team 2526 Robot Model!!
a couple of things that I would reccomend.
1. Make sure you are with your starting Dimentions (width, and Length)
2. Make sure you have more mass on the bottom, our team had to switch to a low rider so that our center of gravity would be lower...this Trackball is MASSIVE! it will cause your robot to tip.
3. The tips of your end effector look a little dangerous to the field elements.
over all, it is a fabulous design and congratulations for coming up with it so early in the season. good luck and don't hesitate to ask more questions.
__________________
FIRST Americorps VISTA, Philadelphia
DAWGMA TEAM 1712: Alumni (2006-2009)
|