I would not recommend the BaneBots encoders at all. We used them with the BaneBots transmissions as intended, and encountered many problems.
An excerpt taken from a previous post I made:
Quote:
Originally Posted by whytheheckme
...... but the BaneBots encoders are constructed poorly, and after a few matches, the superglue (Yes, Superglue) thats holding the encoder wheel to the shaft starts to heat, and allows the wheel to move around, and eventually grind up against the encoder, rendering them useless. I would not recommend the BaneBots encoders.
|
In short, if everything isn't perfect, these will break in a flash.
Jacob