[Chris_Elston]

Sorry took me a bit to get back online...

As you can see, I start to do a frame grab, and it starts to grab the image, then quits. I get the following two errors, screen 1 and screen 2.

I've tried ASRL1 setting for com, and actually selecting COM 1 in the pull down, it's no difference.

Screen 3 is a good frame grab, then if I click on tracking, that's screen 4, it tracks for a few seconds, then the serial errors out.

Again, it doesn't do this on the slower PC, just my Dell D820 laptop. The D820 has a built in COM port. It's the Latitude series.

EDIT:
Also, we use a CUSTOM circuit, a 7.2 volt charger which converts 12 VOLTS to 7.2 VOLTS to the camera. The power to the camera remains good.