|
Re: nason pressure switch wire
Quote:
Originally Posted by holty531
question about wiring pwm wire to nason pressure switch...
the pwm cable is the redblackwhite cable right?so, on the nason pressure switch, are we suppose to cut the pwm cable and attatch the red and black to the nason switch? then we plug the other end into the digitol output?
does anyone have a picture i can see? thannks
|
The switch, as all switches connected to the Digital inputs, needs to be connected between the Black (gnd) and White (signal) wires.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|