[TubaMorg]

Some tips Gizmo to make your life easier:

1. Put your robot up on blocks (wheels off the ground) before turning it on for testing.

2. Get or make a competition port dongle. This lets you disable/enable the robot as well as switch between autonomous and operator control.

3. Use the tutorials in the EasyC help menu.

4. If you are using the kit joysticks, make sure you have the trims set properly. When you turn your robot on and your joysticks are in neutral, all of the Victors should be ORANGE. Adjust the joystick trims to make this so. If adjusting the trims does not work then you will have to calibrate your Victors.