[holty531]

the updated rule 55 says
Rule <R55>
-Each relay module must be protected with one and only one 20A circuit
breaker.

can someone clarify???
the yellow thing in a spike relay module is a fuse, correct?
when used with a compressor, you change the yellow fuse to the 20amp auto reset breaker correct?

so, if there is one 20A circuit breaker in the Spike and there has to be a breaker in the Fuse Panel also right? this equals 2 circuit breakers!

can someone explain how you use only one 20A breaker with the Spike Relay?

thnks.