|
Re: Powering the IR detector from +5V instead of 7+ V.
Quote:
Originally Posted by Al Skierkiewicz
Dave and Phil,
Someone needs to ask this on the Q&A as the supplied IR board has provisions for running from a 5 volt supply by eliminating the regulator. There is a note to that effect on the FIRST supplied schematic. I fully agree that a 20 amp breaker does not match the elctrical code for wiring used elsewhere on the robot.
|
Good idea... I'll see what I can do. Good tip about the added comment on the FIRST schematic. I didn't see that on the original one.
__________________
Phil Malone
Garrett Engineering And Robotics Society (GEARS) founder.
http://www.GEARSinc.org
FRC1629 Mentor, FTC2818 Coach, FTC4240 Mentor, FLL NeXTGEN Mentor
|