Thread: Orientation of ports on Thomas compressor
View Single Post
  Spotlight this post!  
Unread 08-02-2008, 07:42
ALIBI's Avatar
ALIBI ALIBI is offline
Registered User
FRC #0141
Team Role: Parent
  
Join Date: Feb 2007
Rookie Year: 2004
Location: Michigan
Posts: 271
ALIBI is a name known to allALIBI is a name known to allALIBI is a name known to allALIBI is a name known to allALIBI is a name known to allALIBI is a name known to all
Re: Orientation of ports on Thomas compressor
I stand corrected. The GDC considers this a modification of the compressor:

Q & A 2/7/08: "As delivered from the factory, the ports on the Thomas compressor are oriented along the length of the body of the compressor. Removing the top of the housing and rotating the ports would be a modification of the compressor, and is explicitly prohibited by Rule <R92>."

Please do not rotate the ports. We never intended to violate the robot rules and most certainly will not rotate the ports again. We could have easily rotated the ports back to the original configuration had the compressor failed during the robot inspection. I wonder how many other teams/inspectors missed this in the past?