|
Re: VICTOR ISSUES
Check and make sure that all of the screws in the Victors are all the same and the original ones that came with the victors. Smaller screws will short out your victors.
The power from the Maxi block should go into the V+ and V- ends. The motors should be connected to the M+ and M-. Make sure they are connected correctly.
Good luck,
Jacob
__________________
Do what you like... Like what you do!
Jake, the Life Is Good guy
Last edited by Miner : 08-02-2008 at 16:16.
Reason: Victor connections backwards.
|