|
Re: KOP Gear Tooth Encoder Trouble
The printf works now; it wasn't the long int problem, it was something else. But anyway...
The encoder printf is now remaining stable at 2560 and fluctuating to 768 every few times.
And also it's the good encoder, not the bad one.
We have a big code problem: it's putting out 2560 and 768 and 0 and 5 (and other miscellaneous random values) WITHOUT as well as WITH the encoder connected...uhm...
Any ideas? Please?
__________________
I am stricken and can't let you go
When the heart is cold, there's no hope, and we know
That I am crippled by all that you've done
Into the abyss will I run
|