|
Re: Musings from a FIRST Inspector
Quote:
Originally Posted by squirrel
The wires come out easy if you don't strip them properly (5/8" insulation must be removed), insert them fully, and tighten the screw all the way.
If you do these 3 simple things, then the wires will stay in.
|
Thanks, that must be the problem. I think we are at 1/2" or a smidgen under. I'll check it tomorrow.
And Yes, the FIRST Q&A clearly states that a robot that could physically exceed 80" can pass inspection but cannot do so during competition without penalty.
__________________
Ed Barker
Last edited by ebarker : 10-02-2008 at 23:03.
Reason: added Q&A comment
|