|
Re: Modification of the SMC Valve?
Quote:
Originally Posted by Betty_Krocker
Does anyone know if it is considered a modification or legal to drill the mounting holes in the SMC valve base out making them slightly larger in order to tap them for an 8-32 screw to mount to the robot?
|
Now that Dave has given the unofficial answer, (official answers ONLY come from the GDC via the Q&A system), you still need to know a way to mount your valves.
What we have done this year is used "zip ties/ty-wraps" to attach the valves to the mounting board. We drill for holes in the mounting board and then use either a crisscross or a straight across wrap of of the valve.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|