Quote:
Originally Posted by jee7s
The inoperable pressure switch could be explained by wiring.
|
Quote:
Originally Posted by mcf747
3) I have saw some posts on this already, but my safety valve seems to also be set incorrectly.
|
Safety Valve, not pressure switch.... I agree that the switch might be set for a little bit off from 120 PSI. The safety valve is passive and really should 'pop' off at 125 PSI or so.
After reading a few posts on the issue, I will have the team test the valve we're using, just for safety's sake. We've never had a problem, but the function of that valve is a critical parameter.
Don