heyy
you can use "easyC"
there is a copy provided in the KOP
its a very simple drag and drop type program
if you decide to use it
step 1. load it onto the programming computer
step 2. go to file and go to frc competition or something to that effect
step 3. on the side, it will say user functions, or at the bottom of the left side, double click operator
step 4. Drag and drop from the rc control side menu, the type of drive u want, arcade or tank
step 5. a window will pop up and the top of it will say operator interface or something and choose which ports and the axis of ur joysticks
step 6. choose the PWM slots for the motors
step 7. u can drag another Motor operator for arms, claws, or anyother motors
im not sure wat to do if you have an autonomous, or pnuematics
srry
step 8. search the menu bars for a "build and compile or load" or something like that
and click it
then it will say it completed the HEX file. click ok
then connect the comp to the RC and Do what u regularly do to load a program
hope this helps
you can go to the help tab and find out more info
- team 270
