|
Re: pic code
i dont know what im going to use yet but im looking for an 8pin and it has to be compact. i dont know if your familiar with paintball but i want to make a board for my gun. in case you dont know it has a solenoid to release the air, 9volt battery, microswitch to activate which is pushed by the trigger.
well first there has to be two buttons. one will power it on and one will change settings. the first mode will be semi auto. one trigger pull equals one shot. the second mode can be full auto. if you hold the trigger it fires for a predetermined amount a second. for example twenty. the third mode will be what is called ramping in paintball terms. you pull the trigger three times in the set timeframe for example one second.once you get to the fourth pull it will jump up and start going fullauto for as long as you hold the trigger. there will be more modes but this will start. and there also has to be a setting called dwell or how long the solenoid stays open to determine how much air is released. and there are also "eyes" which are infared breakbeam so when a paintball is not in the breach blocking the eyes from seeing eachother it will not fire. this is to avoid breaking paint by the bolt.
i hope this is easier to understand.
|