Quote:
Originally Posted by Paul Copioli
Wayne,
Were you measuring to the top of the overpass or the bottom? The specs clearly state the height of 78" is to the top of the overpass. With the pipe at approximately 1.25", the bottom should measure nominal 76.75". With the +/- 1" that would make the range 75.75" to 77.75".
Paul
|
Paul- you are right- the 78" would be to the top but the bottom spec says approx. 76.5. A 75" robot should have cleared. Not to dwell on this- we will and did adapt.
Next time we'll just have the robot leap the overpass and knock the balls off on the way......
